thundersunsky.blogg.se - Crucial 16gb kit (2 x 8gb) ddr3l-1600 sodimm memory for mac

#Crucial 16gb kit (2 x 8gb) ddr3l 1600 sodimm memory for mac generator#

3) If it boots up then you have MICRON IC DRAM, IF it fails to boot, then move onto step 4.

1) Set DRAM Frequency to 1600MHz and set DRAM Voltage to 1.20v 2) Set CAS# Latency to 9, Write to Read Delay L to 3 and DRAM Write Latency to 9 and Save and Exit.

This will most likely be 1.65v, 1.5v or maybe 1.35v for DDR3, but it may be different if you have low voltage RAM. This will most likely display 'Auto', in which case, you need to change this to your specific value.

After doing this, go back to the previous menu and look for DRAM Voltage.The 1: 4 DES is used to ensure a wide timing The DCDL compensates for per-pin skew between DQs and DQS. The reference voltage VREFDQ generated by VREF GEN is shared by all DQs. The CTLE is used to compensate for channel loss.

#Crucial 16gb kit (2 x 8gb) ddr3l 1600 sodimm memory for mac generator#

of a reference voltage generator (VREF GEN), a CTLE, a PI, a DCDL, a 1:4 de-serializer (DES), and a 4:16 DES.DRAM Voltage = 1.632V Ram = 12GB G.Skill Ripjaws 2 Sets of 6 GB (3 x 2 gb) Ram Link = - G.SKILL Ripjaws Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) Desktop Memory Model F3-16000CL9T-6GBRH.My voltage normally is around the 1.26-1.27V range under normal conditions.

My voltage Max has never gone over 1.28V (according to CPUHD and HWINFO64) while playing games and generally using my computer at normal load and my temps are usually around the 30C range.